X-Cavator 20MT Mini Excavator
$37,999 CAD
The X-Cavator 20MT is the smallest mini excavator in the Mammoth lineup, priced at $37,999 CAD. It runs a Kubota D902 25 HP diesel engine paired with a Japanese-made Nachi piston pump and Nachi travel motors.
High and low travel speed, operator switching, a hydraulic thumb, quick attach, a swing boom and an extendable chassis all come standard. The undercarriage retracts to 39 inches for narrow access and extends to 49 inches for digging stability.
X-Cavator 20MT Mini Excavator Specifications
| Key Specifications | |
|---|---|
Engine | Kubota D902 25HP Diesel |
Max dig depth | 96 inches (8 feet) |
Travel Motors | NACHI travel motors |
Speed | 0-5 KM/H |
Length | 140 inches |
Width | 49/39 inches |
Height | 93 inches |
Weight | 4,432 Lbs. |
Pump | NACHI piston pump |
Hydraulic Flow | 10.5 GPM |
Swing angle | left 65°/ right 58° |
Gradeablility | 58% (30%) |
Ground pressure | 25.5 KPA |
Bucket dig force | 14.8 KN |
Max vertical
dig depth | 75 inches |
Max unloading height | 93 inches |
Max depth of bulldozing | 8 inches |
Max bulldozing height | 10 inches |
Back Min. Swing | 25 inches |
System Pressure | 3045 PSI |
What Is the X-Cavator 20MT Built For?
The X-Cavator 20MT is built for digging jobs in spaces larger excavators cannot reach. Its 96-inch dig depth covers most residential trenching, and the undercarriage retracts to 39 inches for narrow gates and side yards.
At 4,432 lbs it is also the lightest machine in the X-Cavator range, which keeps hauling between job sites simple.
- Utility trenching and drainage work
- Landscaping and grading
- Small-scale construction projects
- Tight-access residential jobs
Ground pressure is 25.5 kPa. Tracked machines with low ground pressure spread their weight over a larger surface area, which helps limit rutting on finished lawns and soft ground.
Compare the X-Cavator Lineup
All three X-Cavator models run Nachi hydraulic pumps and come standard with quick attach, a hydraulic thumb and a swing boom. The differences are size, power, reach and price.
Every figure below comes from the Mammoth specification sheets. See the full X-Cavator 27MT and X-Cavator 35MT pages for complete specs.
| Specification | X-Cavator 20MT | X-Cavator 27MT | X-Cavator 35MT |
|---|---|---|---|
Price | $37,999 CAD | $47,999 CAD | $58,999 CAD |
Engine | Kubota D902 25 HP diesel | Kubota D1105 23 HP diesel | Kubota D1703 24.5 HP |
Max dig depth | 96 in (8 ft) | 112 in (9.3 ft) | 130.5 in (10 ft 11 in) |
Operating weight | 4,432 lbs | 5,842 lbs | 8,488 lbs |
Width | 49/39 in | 59/51 in | 67 in |
Bucket dig force | 14.8 kN | 18.4 kN | 31.1 kN |
Warranty, Financing and Dealer Support
Every X-Cavator 20MT is covered by the Mammoth 5-Year / 3,000-Hour Warranty, the same industry-leading coverage that backs the whole Mammoth fleet.
Financing is available on approved credit. Parts and service support is available through Mammoth’s Canadian dealer network.
X-Cavator 20MT Mini Excavator Features & Benefits
Absolutely. The machine is built with easy-access service points, ensuring quick maintenance checks and reducing downtime.
Choose the 20MT for tight access and easy transport. It digs to 96 inches and weighs 4,432 lbs. Step up to the X-Cavator 27MT for 112 inches of dig depth and more bucket force, or the X-Cavator 35MT for the deepest reach in the lineup at 130.5 inches.
High and low travel speed, operator switching, a hydraulic thumb, quick attach, a swing boom and an extendable chassis all come standard. Power comes from a Kubota D902 25 HP diesel engine with a Nachi piston pump and Nachi travel motors.
The 20MT weighs 4,432 lbs, the lightest machine in the X-Cavator range. Total towing weight depends on your trailer, so check your truck's rated capacity and your provincial trailer and load-securement rules before hauling. Your Mammoth dealer can advise on a safe setup.
Products Not Found
The X-Cavator 20MT is a compact, yet powerful machine with an optimal operating weight of 4432 lbs, making it easy to transport while maintaining excellent digging strength and stability.