Mammoth Machinery Warranty
5-Year / 3,000-Hour Coverage
The Mammoth Machinery warranty covers every machine against defects in materials and workmanship under normal use and service. Built for the toughest jobs in Canada. For a plain-language walkthrough of what the coverage means on a real repair, read what the 5-year equipment warranty actually covers.
Burlington, Ontario (Canadian HQ)
Hydraulics · Chassis · Structure Covered
Parts & Labour Included
Nationwide Dealer Service Network
Warranty Coverage
Mammoth Machinery Inc. (“Mammoth”) warrants that all Mammoth machines are free from defects in materials and workmanship under normal use and service.
Coverage Term
Five (5) years or 3,000 total operating hours, whichever occurs first.
Period Start
Warranty period begins immediately upon delivery to the original purchaser.
Eligible Purchaser
Original purchaser only. Non-transferable without prior written approval from Mammoth Machinery.
Mini Skid Steers
Mini Excavators
Compact Wheel Loaders
Tracked Mini Dumpers
Wheeled Mini Dumpers
Full-Size Track Loaders
Scope of Coverage
The Mammoth Machinery warranty will, at its sole discretion, provide coverage across all major machine components as described below, unless otherwise excluded by the terms of this warranty.
Warranty Repair & Replace
Repair or replace defective components at no cost to the original purchaser. Mammoth determines the appropriate resolution at its sole discretion.
Warranty Parts & Labour
Covers OEM-certified replacement parts and the labour required for all approved warranty repairs at any authorized service centre across Canada.
Major Components
Applies to all major machine components including chassis frames, hydraulic pumps, drive motors, control valves, and structural weldments, unless otherwise excluded.
Engine Warranty Notice
Engines integrated into Mammoth Machinery compact equipment, primarily Kubota and Yanmar, are not warranted by Mammoth Machinery. Engines are covered solely by the original manufacturer under their own warranty terms and approval processes.
Customer Responsibilities
- ✓ Adhere to OEM-specified maintenance intervals (oil changes, filter replacements, fluid levels).
- ✓ File claims directly through the engine manufacturer’s authorized service network.
- ✓ Coordinate all repairs and inspections directly with the engine manufacturer.
- ✓ Use only OEM-specified fluids and lubricants. Non-approved fluids void engine coverage immediately.
NOTE: Mammoth Machinery has no responsibility to coordinate or participate in engine warranty claims. Engine failures due to improper maintenance, non-OEM fluids, or failure to service at required intervals are not covered under this warranty.
Diesel Engines
Diesel Engines
Danfoss · Walvoil
Bondioli & Pavesi
Donaldson · Sumitomo
Warranty Conditions
4.1 Maintenance Requirements
To maintain warranty validity, all equipment must be serviced according to the Mammoth service schedule at intervals specified for Canadian operating conditions.
Authorized Service Providers
- ✓ Mammoth Machinery directly
- ✓ An authorized Mammoth service provider
- ✓ A qualified and Red Seal certified heavy equipment mechanic
Third-Party Mechanic Requirements
- ✓ Certification must be verifiable (Red Seal or equivalent)
- ✓ All work must follow Mammoth specifications
- ✓ Complete service records must be maintained and retained
- ✓ Mammoth reserves the right to deny coverage where improper maintenance contributed to failure
4.2 Proper Use
Warranty applies only under normal use and operating conditions. Coverage is voided by misuse, abuse, neglect, or unauthorized modifications to the machine.
Coverage Applies When
- ✓ Machine is operated under normal use and operating conditions
- ✓ Machine is used for its proper intended application
- ✓ No misuse, abuse, neglect, or unauthorized modifications are present
Typical Service Intervals
| Engine Oil & Filter | Every 250 hrs |
| Hydraulic Filter | Every 500 hrs |
| Drive System Fluid | Every 1,000 hrs |
| Full Inspection | Annually |
Refer to your Operator's Manual for model-specific intervals.
Warranty Service
All warranty service is subject to pre-approval by Mammoth Machinery and must be performed at an authorized Mammoth service centre.
Authorized Centre Only
All warranty repairs must be performed at a Mammoth-authorized service centre. Remote diagnosis alone is not sufficient for formal claim approval.
Transportation Costs
The customer is responsible for all transportation costs to and from the authorized service centre. This warranty does not cover travel, mileage, or on-site service costs.
Prior Approval Required
All warranty claims must be approved by Mammoth Machinery prior to any repair being undertaken. Unauthorized repairs will not be reimbursed under this warranty.
Exclusions & Wear Items
| Category | Items / Situations Not Covered |
|---|---|
| Wear Items | Oils, filters, lubricants, tracks, wheels, rollers, seals, O-rings, hoses, belts, batteries, and all standard tune-up components. |
| Misuse & Neglect | Damage from misuse, neglect, abuse, overloading beyond rated capacity, operation in corrosive environments without protection, or operation contrary to the Operator's Manual. |
| Non-Approved Parts | Failures caused by installation of non-Mammoth or non-OEM replacement parts, unauthorized attachments, or unauthorized modifications to factory systems. |
| Accidents | Physical damage from collisions, rollovers, vandalism, flood, fire, theft, or Acts of God (force majeure). |
| Maintenance Failure | Failure to follow prescribed maintenance schedules, or use of fluids and lubricants not specified by the OEM, resulting in accelerated wear or component failure. |
| Cosmetic Damage | Scratches, dents, paint chips, surface rust, decal deterioration, or any cosmetic imperfection that does not affect machine function or safety. |
Important: This warranty document is a summary for reference purposes. The binding warranty terms are contained in the Mammoth Machinery Limited Warranty Agreement provided at the time of purchase. In the event of any discrepancy, the original signed warranty agreement governs.
Claim Process & Registration
Immediate Written Notice
Owner must provide prompt written notice to Mammoth Machinery of any defect. Contact your authorized Mammoth dealer within 48 hours of detecting a potential issue.
→ Have your serial number and current hour meter reading ready when you call.
Stop the Machine
Owner must immediately stop using the machine to prevent further damage. Continued operation of a defective machine may void warranty coverage for that issue.
Technical Inspection
The unit must be delivered to an authorized Mammoth service centre for inspection by a certified technician. All claims must be approved by Mammoth prior to repair.
→ Remote diagnosis alone is not sufficient for formal claim approval.
Approval & Resolution
Upon approval, Mammoth will authorize repair or replacement at no cost. Mammoth may require that defective parts be returned for inspection.
→ Target resolution: 5–10 business days depending on parts availability.
Register Your Machine
All new machines MUST be registered within 30 days of delivery to the original purchaser to qualify for the full 5-year / 3,000-hour coverage.
Late registration: warranty start date defaults to the date of manufacture or shipment as determined by Mammoth Machinery.
Warranty Support
Questions about your coverage or an existing claim? Our team responds within 1 business day.
Warranty Registration
Register Your Machine
Complete this form to register your Mammoth Machinery equipment. Registration must be completed within 30 days of delivery to activate the full 5-year / 3,000-hour warranty.
Late registration: start date defaults to date of manufacture or shipment as determined by Mammoth.
Ready to buy with confidence?
Every Mammoth machine is covered from delivery, and registering within 30 days secures the full 5-year term. Browse our full lineup of compact equipment for Canadian contractors.